Publications
Publications by Project Year
Solicitation Call | Program | Project Title | Publication Title | Authors |
---|---|---|---|---|
Fall 2021 | HPC4Mfg | Computational modeling of cost-effective carbon capture technologies on industrial gas turbines to reduce CO2 emission | Predicting exhaust gas recirculation impacts on instability and emissions of an industrial gas turbine combustor using large eddy simulations, Proceedings of the ASME 2024 Turbo Expo: Power for Land, Sea, and Air, London, UK, 2024 | C. Xu, Y. Sung, D. Johnson, & C. Steele |
Spring 2021 | HPC4Mfg | Clean, Dispatchable and Affordable CHP using a Novel Argon Power Cycle | Modeling Pre-Chamber Assisted Efficient Combustion in an Argon Power Cycle Engine, SAE Technical Paper 2024-01-2690 | Joohan Kim, Riccardo Scarcelli, Guillaume Beardsell, Tyler Strickland, Christopher Nilsen, & Miguel Sierra Aznar |
Solicitation Call | Program | Project Title | Publication Title | Authors |
---|---|---|---|---|
Fall 2020 | HPC4Mfg | High-Fidelity and High-Performance Computational Simulations for Rapid Design Optimization of Molten Sulfur Thermal Energy Storage Technology | Exploring the Limits of Empirical Correlations for the Design of Energy Systems with Complex Fluids: Liquid Sulfur TES as a Case Study | Madeleine C. Olivera, Munjal Shaha, Janna Martinek, Karthik Nithyanandam, Zhiwen Ma, & Michael J. Martin |
Fall 2020 | HPC4Mfg | Robust Film Cooling Under Manufacturing Uncertainty For Improved Jet Engine LifeCycle Energy Efficiency | Wall-resolved LES study of shaped-hole film cooling flow for varying in-hole surface roughness | I. Jarrah, P. Pal, M.M. Ameen, & M.M. Joly |
Spring 2020 | HPC4Mfg | Microwave-enhanced manufacturing of ceramic matirix composites | Modeling Microwave-Enhanced Chemical Vapor Infiltration Process for Preventing Premature Pore Closure | Wenjun Ge, Vimal Ramanuj, Mengnan Li, Ramanan Sankaran, Ying She, & Zissis Dardas |
Spring 2020 | HPC4Mfg | Microwave-enhanced manufacturing of ceramic matirix composites | Effects of temperature inversion on densification in chemical vapor infiltration | Vimal Ramanuj, Mengnan Li, Wenjun Ge, Ramanan Sankaran, Ying She, & Zissis Dardas |
Spring 2020 | HPC4Mfg | Laser Powder Bed Fusion To Improve Car Part Quality | A Gaussian Process-Based extended Goldak heat source model for finite element simulation of laser powder bed fusion additive manufacturing process, Computational Materials Science, 2024, vol 244, pp113185 | Jiahao Cheng, Yang Huo, Patxi Fernandez-Zelaia, Xiaohua Hu, Mei Li, & Xin Sun |
Winter 2020 | HPC4Mfg | Development of Efficient Process for Manufacturing Thermoplastic Composites with Tailored Properties | Investigation of Crashworthiness of Carbon Fiber-Based Electric Vehicle Battery Enclosure Using Finite Element Analysis | Shank S. Kulkarni, Forrest Hale, M. F. N. Taufique, Ayoub Soulami & Ram Devanathan |
Winter 2020 | HPC4Mfg | Development of Efficient Process for Manufacturing Thermoplastic Composites with Tailored Properties | Finite Element Analysis and Machine Learning Guided Design of Carbon Fiber Organosheet-based Battery Enclosures for Crashworthiness | Shadab Anwar Shaikh, M. F. N. Taufique, Kranthi Balusu, Shank S. Kulkarni, Forrest Hale, Jonathan Oleson, Ram Devanathan & Ayoub Soulami |
Solicitation Call | Program | Project Title | Publication Title | Authors |
---|---|---|---|---|
Fall 2019 | HPC4Mfg | Topology Optimization of Fischer Tropsch Reactor Design for Synthetic Fuel Production | Design optimization of integrated cooling inserts in modular Fischer-Tropsch reactors | Barrera, J. L., Hartvigsen, J. J., Hollist, M., Pike, J., Yarosh, A., Fullilove, N. P., & Beck, V. A. (2023) |
Fall 2019 | HPC4Mfg | Modeling Coating Flow and Dynamics during Drying | Insights from high-fidelity modeling of industrial rotary bell atomization | Robert I. Saye, James A. Sethian, Brandon Petrouskie, Aaron Zatorsky, Xinyu Lu, & Reza Rock |
Fall 2019 | HPC4Mfg | Prediction of the Influence of Strain Magnitude and Strain Path on The Resulting Microstructure and Post-Forming Mechanical Behavior of Ra Containing High Formability Steels | A Mesoscale Crystal Plasticity Model to Predict Room-Temperature Deformation and Martensitic Transformation of High-Strength Quenching and Partitioning (Q&P) Steels and Validation with Synchrotron X-ray Diffraction. International Journal of Plasticity, (2024), 172, 103833 | Jiahao Cheng, Brian K. Lin, Narayan S. Pottore, Sriram Sadagopan, Hong Zhu, & Xiaohua Hu |
Fall 2019 | HPC4Mfg | Reduced Order Modeling and Performance Prediction for Steel Refining Ladle Processing via HPC | Reduced Order Modeling via CFD Simulation Data for Inclusion Removal in Steel Refining Ladle (at International Conference on Control, Mechantronics and Automation, London, Nov, 2024) | H. Wang, X. Guo, Q. Zhou, B. King, & J. Li |
Fall 2019 | HPC4Mfg | Ab-initio Guided Design and Materials Informatics for Accelerated Product Development of Next Generation Advanced High Strength Steels (AHSS) | Machine-learning-aided density functional theory calculations of stacking fault energies in steel | A. Samanta, P. Balaprakash, S. Aubry, & B. Lin |
Spring 2019 | HPC4Mfg | Deep Learning-Augmented Flow Solver to Improve the Design of Gas-Turbine Engines | Development of a machine learning wall model for large-eddy simulation of gas turbine film cooling flows | T. Kumar, P. Pal, A.C. Nunno, S. Wu, O. Owoyele, M.M. Joly, & D. Tretiak |
Spring 2019 | HPC4Mfg | Deep Learning-Augmented Flow Solver to Improve the Design of Gas-Turbine Engines | Wall-resolved LES study of shaped-hole film cooling flow for varying hole orientation | A.C. Nunno, S. Wu, M.M. Ameen, P. Pal, P. Kundu, A. Abouhussein, Y.T. Peet, M.M. Joly, & P.A. Cocks |
Spring 2019 | HPC4Mfg | Deep Learning-Augmented Flow Solver to Improve the Design of Gas-Turbine Engines | Assessment of machine learning wall modeling approaches for large eddy simulation of gas turbine film cooling flows: An a priori study | T. Kumar, P. Pal, S. Wu, A.C. Nunno, O. Owoyele, M.M. Joly, & D. Tretiak |
Solicitation Call | Program | Project Title | Publication Title | Authors | |
---|---|---|---|---|---|
Fall 2018 | HPC4Mtls | Advanced Thermal-Hydraulic Model of Heat Recovery Steam Generator | Computational fluid dynamics investigations of flow, heat transfer, and oxidation in heat recovery steam generator | Nithin S. Panicker, Marc Olivier G. Delchini, Tom Sambor, & Adrian S. Sabau | |
Fall 2018 | HPC4Mfg | Simulated Adhesive Response to Aging | Molecular Dynamics Simulation of Hygroscopic Aging Effects in Epoxy Polymer | Taufique, M. F. N., Losada, M., Hamel, S., Goldman, N., DiTucci, M., Pagnotti, L., Willis, D., Torres, M., & Devanathan, R. 2023. | |
Spring 2018 | HPC4Mtls | Predicting Limit Rub Response in Advanced Gas Turbine Engines | Modeling Deformation and Failure in Alsi-Polyester Abradable Sealcoating Material Using Microstructure-Based Finite Element Simulation, Materials and Design, Vol. 219, 110791, 2022 | Jiahao Cheng, Xiaohua Hu, Drew Lancaster, Xin Sun,& William Joos | |
Spring 2018 | HPC4Mtls | Predicting Limit Rub Response in Advanced Gas Turbine Engines | Micro–macro finite element modeling method for rub response in abradable coating materials, Journal of Materials Science, 2024, vol59, pp 4934-4947 | Jiahao Cheng, Xiaohua Hu, Xin Sun, & William Joos | |
Summer 2018 | HPC4Mfg | Optimization of Alumina and Aluminum Fluoride Feeding in Advanced Aluminum Smelting Cells using Large Eddy Simulation | A Large Eddy Simulation Study of Flow Turbulence, Alumina Transport, and Bath Temperature Evolution in Conventional Aluminum-Smelting Cell Using OpenFOAM | Panicker, N. S., Chaudhary, R., Rao, V. M., Delchini, M. O. G., & Jain, P. K. (2022) | |
Winter 2018 | HPC4Mfg | Predictive Modeling of Polyurethane Insulation Manufacturing to Optimize Performance, Reduce Waste, and Design Processes | Bubble-Scale Observations of Polyurethane Foam Expansion | Christine Roberts, Lisa Mondy, Grant Soehnel, Casper Brady, Bion Shelden, Melissa Soehnel, Robert Garcia, Weston Ortiz & Rekha Rao | |
Winter 2018 | HPC4Mfg | Predictive Modeling of Polyurethane Insulation Manufacturing to Optimize Performance, Reduce Waste, and Design Processes | Density and bubble size prediction of polyurethane foam using a pressure dependent population balance equation | Weston Ortiz, Lisa Mondy, Christine Roberts, & Rekha Rao | |
Winter 2018 | HPC4Mfg | Application of High-Performance Computing (HPC) to Optimize Reheat Furnace Efficiency in Steel Manufacturing | Using Oxygen Enrichment Combustion to Reduce Fossil Energy Consumption and Emissions in Hot Rolling Steel Production | Khalid, Y., M. Wu, A. Silaen, F. Martinez, T. Okosun, B. Worl, J. Low, C. Zhou, K. Johnson, & D. White. 2021 | |
Winter 2018 | HPC4Mfg | An Advanced Meso-Scale Peridynamic Modeling Technology using High-Performance Computing for Cost-Effective Product Design and Testing of Carbon Fiber Reinforced Polymer Composites in Light-weight Vehicles | An FEM-based peridynamic model for failure analysis of unidirectional fiber-reinforced laminates | Ren, B., Wu, C.T., Seleson, P., Zeng, D., Nishi, M., Pasetto, M | |
Winter 2018 | HPC4Mtls | An Advanced Meso-Scale Peridynamic Modeling Technology using High-Performance Computing for Cost-Effective Product Design and Testing of Carbon Fiber Reinforced Polymer Composites in Light-weight Vehicles | An advanced meso-scale peridynamic modeling technology using high-performance computing for cost-effective product design and testing of carbon fiber reinforced polymer composites in light-weight vehicles | Seleson, P., Ren, B., Wu, C.T., Zeng, D., Pasetto, M. | |
Winter 2018 | HPC4Mfg | Predictive Tools for Customizing Heat Treatment of Additively Manufactured Aerospace Components | Precipitate growth kinetics under inhomogeneous concentration fields using a phase-field model | Y. Song, B. Radhakrishnan, S. Gorti & R. Acharya | |
Winter 2018 | HPC4Mtls | High-Performance Multi-Scale Modeling of Material Imperfections of Critical Fossil Power Generation Components | Crack Nucleation from Non-metallic Inclusions in Aluminum Alloys Described by Peridynamics Simulations | M. R. Karim, K. Kadau, S. Narasimhachary, F. Radaelli, C. Amann, K. Dayal, S. Silling, & T. C. Germann | |
Winter 2018 | HPC4Mtls | High-Performance Multi-Scale Modeling of Material Imperfections of Critical Fossil Power Generation Components | Crack Nucleation at Forging Flaws Studied by Non-Local Peridynamics Simulations |
|
|
Solicitation Call | Program | Project Title | Publication Title | Authors |
---|---|---|---|---|
Fall 2015 | HPC4Mfg | Integrated Predictive Tools for Customizing Microstructural and Material Properties of Additively Manufactured Aerospace Components | Phase field simulations of microstructure evolution in IN718 using a surrogate Ni-Fe-Nb alloy during laser powder bed fusion | B. Radhakrishnan, S. B. Gorti, J. A. Turner, R. Acharya, J. A. Sharon, A. Staroselsky & T. El-Wardany |
Fall 2015 | HPC4Mfg | Integrated Predictive Tools for Customizing Microstructural and Material Properties of Additively Manufactured Aerospace Components | Precipitate growth under inhomogeneous concentration fields using a phase-field model,” Physical Review Materials 5, 053401, 2021 | Y. Song, B. Radhakrishnan, S. Gorti & R. Acharya |